Plastične kapice za boce s sokom za podizanje opreme za zatvaranje dovodnika

Opis

Notification prior to starting the bottles capping machine model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary type

1:Before the machine is plugged in, make sure the power switch is in the closed state, and then follow the instruction.

2:If the machine does not run in a long time, it should be wiped with a piece of dry cloth and must not be cleaned with any corrosive cleaning agent.

3:It is strictly prohibited to spurt any liquid into the electric box of the machine, so as to avoid corrosion to the internal electrical components and cause short circuit.

4:Check according to the equipment packing list models, specifications and quantity of the equipment and materials to make sure that they meet the requirements of design and product standards and accompanied by certificates of conformity.

5: Check the appearance of the equipment to make sure that it is free from any deformation, damage and corrosion, and all spindles that they should be flexibly rotating without any blockage.

6: This machine is working under single phase AC 110V, and the flat 3-legged power plug should be plugged into the power socket with a ground wire.

Technical Parameters of model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary plastic juice bottle caps lifting feeder capper equipment:

Model NPACK-AC50
Capping speed:15-30 pieces/min
Rated voltage:110Ｖ/60Hz(US Standard)
Machine Power:0.8KW
Ampere:2.2A
Exterior dimension:2230*1460*1600 MM(L*W*H）
Air Pressure: 0.7 MPa
Weight: About 300 KG

Capping machine in details:

I.Structures of the machine:

Ⅱ. Optical fiber electric eye description

1.electric Eye to detect bottles:

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming
bottles.
When the incoming bottle is detected, the "turntable" rotates.

2. Lid-delivery electric eye

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming covers.

When the incoming lid is detected, the "taking-out mechanism" rises for taking material.

3. Lid-delivery electric eye

►When it is operated in automatic mode: The purpose of this electric eye is to detect incoming bottles.

When the incoming bottle is detected, the "lock cap mechanism" rotates the lock cap downwards.

Ⅲ.Switch button and wiring port.

1.Touch screen and emergency stop

2.Feed motor and lid vibration plate controller

Vibration plate controller

Vibration plate controller: By adjusting the voltage, adjust the discharging speed.

3.Power switch and sockets

4.Motor controller

Frequency transformer: By adjusting the frequency transformer button, adjust the motor speed.

Ⅵ.Maintenance on model NPACK-AC50 Bottles capping machine

1 Potrebno je provjeriti i održavati mašinu za izduživanje mašine i optimiziranje funkcije stroja;

Radnu mašinu treba održavati svaka tri meseca; Ležajevi i deo prenosnika moraju biti podmazani mašću; Podmazivanje se mora vršiti periodično; Ulje kliznog puta (N68) treba dodavati u dio kao što su pomicanje ili podizanje kretnih mehanizama dva puta dnevno; Automobilsko ulje (N68) treba dodati u rotacijske ili ljuljajuće dijelove; Svakih pola meseca dodajte mast u otvor za odlaganje; Svakog meseca jednom uljnom mlaznicom dodavanjem masti;

2 Nikada ne upotrebljavajte metalne alate za udaranje ili struganje površine na kojoj je spoj povezan na dijelove poput dijelova ili kalupa.

3.Ako mašina prestaje raditi dulje vrijeme, dodajte mast za podmazivanje u dijelove poput prijenosa ili dijela ležaja; Mašinu tretirajte i vodootpornom zaštitom。

4 Nikada ne stavljajte nikakve predmete na uređaj da ne biste oštetili mašinu.

5. Povremeno očistite prašinu unutar komponenti i provjerite sve vijke i pričvrstite svaki odvrnuti vijak.

6. Provjerite vijke na priključnicama za ožičenje u određeno vrijeme i provjerite je li vijak fiksiran;

7.provjerite da li postoji električna stanica u izvučenoj stazi od električnih kutija; Ako je dio previše labav, pričvrstite vijak kako ne bi došlo do abrazije ili oštećenja izolacijskog sloja, što može prouzrokovati električno curenje;

8. Provjerite lako istrošene tačkice i na vrijeme promijenite oštećene;